- Introduction Video
- Postshow Report
- Activity Review
- Exhibitor of
- How to Exhibit
- Exhibitor Inquiry
- Online Application
- Sales Brochure
- Customer Service
Criteria for the Green Custom-built Stand
In implementing the development idea of creativity, harmonization, green and opening up, as well as consolidating the results of development, the Green Canton Fair program will be normalized since the 126th session. A target of 100% coverage of Green Stands in the 126th session of Canton Fair has been established.
Criteria for the Green Custom-built Stand of Canton Fair
The criteria herein define the design, structure, material, workmanship of stand setting-up and dismantling as well as the display effect, which shall be applicable for all custom-built stands in the Canton Fair.
The Green Stands shall comply with trends of conciseness, standardization and environmental protection. Design should follow the reduce, reuse and recycle principle. The structures should be modular and component-based. Regeneration and recycling materials should be key materials for these stands. The display effects should well demonstrate the corporate philosophy, and image of the corporate and its products.
The stands should be fabricated following the basic requirements and green requirements set herein.
Pass the design verification of custom-built stand of the Canton Fair.
b. Fire-protection and structure safety
（i）Pass the fire-protection and structure safety verification of the Canton Fair.
（ii）Ensure the entire strength, rigidity, stability and join stability of the stand structure.
（iii）Stand design and construction should strictly comply with relevant national imposed technical specifications, standards and regulations.
c. Safety of power usage
（i）Pass the safety of power usage verification of the Canton Fair.
（ii）Stand construction should strictly comply with relevant national imposed technical specifications, standards and regulations for electrical installation.
d. Refer to the manual book of the Canton Fair for details.
3-Rprinciple shall be followed, they are：
A. Reduce: minimize materials to realize the stand function.
B. Reuse: materials should be reused as the original.
C. Recycle: Economically recycle and reuse materials which help to realize the stand function.
（i）Regeneration , recycle, Non-toxic environmental protection material or recycling materials should be employed in the construction. They should comply with standards set in A and B of this item.
A. Quantity of decoration materials used for full-metal structures should be less than 10% of the total cubage of the structure itself (as per cubage of the structure). Only non-timber materials shall be allowed for this purpose. The constructional materials must be 100% recyclable.
B. Quantity of timber materials used for mixed structures should be less than 30% of the total cubage of the structure itself (as per cubage of the structure). The constructional materials must be 100% recyclable.
（ii）Light, easy for dismantling, loading and haulage.
（iii）Efficient light bulb used in the lighting system should not be lower than 80%.
C. Setting-up and dismantling
（i）On-site fabrication should be modular and component-based. Construction and dismantling should be in good order, controllable, convenient, safe and expedited.
（ii）No adverse impact should be resulted to persons, exhibition halls and facilities in the complex. No dust, noise, toxin gas and discarded materials should be left in the halls. No violations of any regulations should be allowed.
（i）Demonstrate the corporate philosophy, image of corporate and products.
（ii）The stands should be transparent and well structured. No timber materials should be used for capping.
（iii）Display should be concise, harmonious and beautiful.
3. The criteria herein defined should be used internally by the Canton Fair. China Foreign Trade Centre shall be responsible for interpretation of the criteria.
4. These criteria should take effect from the 115th session of the Canton Fair.